Z43F-16C DN125 平板闸阀适用于天然气，石油，化工，环保，城市管道，燃气管线等输送管线

Z43F-16C DN125 平板闸阀适用于天然气，石油，化工，环保，城市管道，燃气管线等输送管线

Z43F-16C DN125 平板闸阀适用于天然气，石油，化工，环保，城市管道，燃气管线等输送管线

Z43F - 16 - c DN125 flat gate valve is suitable for natural gas, petroleum, chemical industry, environmental protection, city pipeline, pipeline gas pipeline, etc

电动平板闸阀适用于天然气，石油，化工，环保，城市管道，燃气管线等输送管线，放空系统和汽储存装置上，用作启闭设备。适用于天然气开采和净化的长输管线。

平板闸阀的特点：
1.阀座的密封结构应为弹性有预紧力，上、下游密封座同时密封的结构。阀座与密封物间始终为面对面密封。

2.阀座有自清洗功能，并且在阀门开启或关闭过程中不受气流的直接冲刷。阀座应由有润滑、不磨损材料制成。

3.阀门执行机构的故障不会影响到阀门的其它部分，维修和更换工作能够在不拆下阀门的情况下进行。

(1) 轭架套管–铝青铜轭架套管配置针形止推轴承，程度减少操作扭矩。

(2) 阀杆–螺纹长度直到托架；销钉和点焊；具有稳定性。

(3) 压力密封–结构简单，配置分段扣环和镀银低碳钢垫圈，有助于拆卸和实现的阀帽密封。

(4) 阀座环–焊接阀座环垂直于流动通道，易于维护。

(5) 执行机构–这些阀门可以配置电动、液动或气动执行机构。DN300以下配置标准手动手轮，DN350以上配置斜齿轮操作机构。

(6) 轭架–完全装配式轭架通过抗震测试，易于维护和安装执行机构。

(7) 压盖–两件式，自调节压盖，避免被弹出。

(8) 整体后座–硬面，使用寿命***长。

(9) 阀瓣–弹簧负载阀瓣能够自行调节，减少执行机构的扭矩需求。

(10) 整体止动–整体铸造托架止动装置，定位组装的托架阀瓣，使得阀座更加***。

Electric flat gate valve is suitable for natural gas, petroleum, chemical industry, environmental protection, city pipeline, the gas pipeline conveying pipeline, such as steam vent system and the storage device, used for opening and closing device. Suitable for natural gas exploration and purification of long distance pipeline.

The characteristics of the flat gate valve:

1. The seat of the sealing structure should be elastic pre-tightening force, either upstream or downstream seal seat sealing structure at the same time. Seating and sealing seal between content is always face to face.

2. The seat has self-cleaning function, and in the process of the valve opened or closed without being directly eroded by the airflow. The seat should consist of lubrication, no wear materials.

3. The valve actuator fault will not affect other parts of the valve, repair and replacement work can be conducted without dismantling the valve.

(1) the yoke sleeve - aluminum-bronze yoke sleeve configuration needle thrust bearing, and reduce operating torque.

(2) stem - length of thread until the carrier; Pin and spot welding; Has the stability.

(3) pressure seal - uncomplicated design, configuration of segmented retaining ring and mild steel silver plated gasket to aid disassembly and realize the bonnet seal.

(4) the seat ring - welded-in seat rings are perpendicular to the flow channel, easy to maintain.

(5) actuators - these valves can be furnished with electric, pneumatic or hydraulic cylinder actuators. 12 the following configuration standards manual handwheel, oblique gear operator DN350 above configuration.

(6) yoke - fully fabricated yoke is seismically testing, easy maintenance and actuator mounting.

(7) gland - two piece, self-adjusting gland, avoid being pop up.

Integral backseat - hardfaced (8), the longest service life.

(9) disc - spring loaded discs can adjust themselves, reduce actuator torque requirements.

(10) integral stop - integrally cast carrier stop, positions carrier disc assembly, stable and reliable seating.

我公司长期提供各种阀门，请随时拨打下方的电话，点击留言或QQ与我交谈。联系我时，请说明是在中国供应商上看到的，谢谢！